What the thread found

• The F65 uses the same power connector as the Genesis, F23, and F35 cameras.
• The camera can be powered through a steadicam sled using a y-cable designed for F35 or Genesis.
• Run-stop control uses an Arriflex/Moviecam 3-pin connector (Part # 4521).
• Handheld setups for the F65 weigh approximately 55 pounds.
• Stripped-down steadicam configurations weigh roughly the same as an Arricam.
• Due to its size, the camera requires the steadicam sled to be held further from the operator's centerline compared to other cameras.
• Power consumption claims for the F65 may be overstated, with battery change frequency comparable to or better than Alexa systems.
• The camera's rear mounting area has limited clearance, making low-mode operation and balancing challenging.
• Back-heavy steadicam setups require careful balancing adjustments to maintain proper contact between the cheeseplate and d-box.
• The F65 transmits a monitor signal format different from PsF, requiring compatible HD-SDI monitoring equipment.

Depends on

• Reports are based on specific configurations with mechanical shutter and onboard recorder.
• One operator disagreed with others' power consumption assessments, citing personal experience.
• Steadicam weight estimates are approximate and varied depending on specific rig configuration.
• Limited mounting surfaces on the camera body restrict accessory placement options.
• Discussion does not address all possible power and control setups, only those experienced by contributors.

Parts

Low Mode

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
3. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsDisputedSteadiHub
4. 2026Low mode and flipping the image: what to check on the camera before the dayOperator practice