What the thread found

• The 6-pin Hirose connector on Master Greenscreen CRT monitors has a different pinout than Transvideo or Modulus monitors
• The monitor accepts either 12V or 24V power on specific pins of the Hirose connector
• Applying voltage to the video pin instead of power pins may potentially damage internal circuitry

Depends on

• The pinout diagram referenced in the original post is not included in this summary
• No manual or official documentation was located in the discussion
• The user's attempt to power the monitor with only 14.8V from a battery failed for unknown reasons
• Confirmation whether damage occurred from incorrect voltage application was not established

Gear in this thread

Moduluscatalog

Same gear or parts

1. 2017Wireless teleprompter setups for steadicam operationGeneral Discussion
2. 2016Performance and reliability characteristics of Tiltamax wireless video transmitters compared to competing brandsDisputedVideo Assist and Video Accessories
3. 2014Teradek Bolt transmitter running hot during operationVideo Assist and Video Accessories
4. 2014DC voltage converter box with adjustable output range and protection featuresDisputedGeneral Discussion