What the thread found

• Standard definition wireless transmitter-receiver systems from drone manufacturers can transmit prompter signals to a steadicam rig with minimal added weight on the receiver side.
• Prompter operators typically provide CVBS or SD-SDI signals rather than HD-SDI, requiring conversion equipment if working with HD systems.
• A Decimator or BlackMagic converter can be used to convert SD-SDI signals to CVBS for compatibility with standard monitors.
• Mounting a prompter monitor above the lens shows significantly less of the talent's reading compared to mounting it below the lens.
• Consumer-grade wireless video systems with 2-mile range offer cost-effective solutions that pay for themselves within a few rental uses.
• iPads paired with wireless video transmitters such as Teradek Cube can serve as prompter displays with acceptable latency for walk-and-talk scenes.
• A small lightweight monitor mounted on the steadicam rig provides better viewing angles than relying on the prompter operator's equipment alone.

Depends on

• Prompter operators may lack technical knowledge about their own signal specifications and capabilities.
• Monitor placement preference may be determined by production requirements rather than operator preference.
• The setup costs depend on whether equipment is rented or purchased for repeated use.
• Experience shared is primarily from narrative film and television production rather than other applications.

Gear in this thread

Moduluscatalog

Same gear or parts

1. 2022Power connector pinout for Master Greenscreen CRT monitor with 6-pin Hirose connectorMonitors
2. 2016Performance and reliability characteristics of Tiltamax wireless video transmitters compared to competing brandsDisputedVideo Assist and Video Accessories
3. 2014Teradek Bolt transmitter running hot during operationVideo Assist and Video Accessories
4. 2014Performance comparison of wireless video transmitter systems for on-location workDisputedVideo Assist and Video Accessories