What the thread found

• The CRT monitor attaches to the Master rig via a single Allen screw and a Hirose 4-pin connector that simply unplugs without soldering.
• The Transvideo mounting bracket provides a rigid, simple single-screw attachment system that requires no modification to the Master rig and allows the CRT to be reinstalled later.
• A Hirose adapter cable connects the Master's original 4-pin Hirose connector to the LCD monitor's 6-pin Hirose input, delivering both video and 12V power in one cable.
• The Transvideo bracket is more rigid and stable than the Teletest bracket, which can exhibit unwanted movement despite being well-machined.
• When selecting an LCD monitor for this setup, a super-bright model is recommended for viewing in full sunlight.
• The entire conversion process requires no soldering and can be completed by someone without technical experience.
• The CRT assembly can be removed and reinstalled non-destructively, making the LCD conversion reversible.

Depends on

• Discussion from 2006, technology and available products may have changed.
• Some information about Teletest bracket performance is anecdotal and limited.
• Specific pricing and availability of components was not provided in the thread.
• The conversation does not address power supply requirements or battery compatibility beyond the 12V already supplied by the Master.

Parts

Monitor Bracket

Same gear or parts

1. 2026Mounting a Mo-Sys LED-wall tracking sensor on ARRI Trinity 2 with the sensor oriented upward for virtual production.FacebookArri Artemis Trinity
2. 2026Rigging a RED Komodo 6K on a CAME-TV Steadicam® sled for improved inertia and operator technique.DisputedFacebookSteadicam operators group
3. 2026Choosing and troubleshooting the monitor on a stabilizer rigDisputedOperator practice
4. 2026Powering everything from the sled: voltage, current, and why the two get confusedOperator practice