What the thread found

• The original Flyer remains a solid choice for lighter cameras like EX3 or HVX200 models and costs less than the LE
• The Flyer LE features a thicker extendable post that handles heavier camera loads more easily than the original model
• The Flyer LE has a larger knurled gimbal grip and a redesigned topstage that is quicker to use compared to the original Flyer
• The original Flyer's 3/4 inch post becomes difficult to work with in low mode when carrying heavier cameras
• The Flyer LE can technically support a RED camera when stripped down, but the weight becomes problematic once essential accessories like follow focus, matte box, and monitoring equipment are added
• Cable routing through the topstage becomes an issue with RED cameras on the LE, as power and video cables may not fit through the hole
• The extendable post on the Flyer LE allows balance adjustments between takes without needing to remove the rig from the stand and use a wrench

Depends on

• Comparisons focus on specific camera models from 2011 and may not apply to modern equipment
• The discussion about RED camera compatibility is limited to one operator's experience with a stripped-down configuration
• No direct side-by-side testing reported between both models with identical camera setups
• The original Flyer's performance with heavier cameras is described as possible but not ideal

Parts

Top Stage, Low Mode, Follow Focus

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
3. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
4. 2026Tiffen Steadicam® Elite sled (2026): build quality, power distribution, and load capacity versus Steadicam® Axis.FacebookSteadicam operators group