What the thread found

• The Arri Lite LT camera body with eyepiece weighs approximately 8 kilograms, plus 3 kilograms for the magazine and accessories, totaling around 14 kilograms for a complete setup.
• A 100% video top accessory can be installed to replace the optical viewfinder and eyepiece, reducing overall camera weight and bulk.
• The camera balances well and is considered one of the lighter synchronous 35mm film cameras available.
• Removing the optical viewfinder and eyepiece blocks access to the standard monitor input connector.
• Despite initial concerns about weight, the camera proved manageable for handheld operation in the field with acceptable fatigue levels.

Depends on

• The user could not source the 100% video top accessory due to production company equipment limitations and remote location in the Philippines.
• Initial weight estimates proved higher than actual handheld experience suggested, indicating initial concerns may have been overestimated.
• The thread does not provide definitive specifications on how much weight is actually saved by removing the eyepiece assembly.
• Weight assessment was ultimately subjective based on individual user experience rather than precise measurements.

Parts

Low Mode

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.DisputedFacebookThe Steadicam Group
3. 2026Rig setup for 180-degree immersive camera operation with Blackmagic URSA Cine Immersive: minimizing rig and monitor visibility in ultra-wide field of view.FacebookThe Steadicam Group
4. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group