SteadiHub
2005Sled forum

Shipping case options for assembled Steadicam sleds

21 years old. Gear and prices may have changed since.

What the thread found

  • Repeatedly disconnecting and reconnecting PRO connectors by removing the battery base can eventually damage the connectors through cross-threading or wear
  • Standard Pelican cases like the 1650 are often too short for fully assembled sleds with typical configurations
  • Custom cases from manufacturers like Thermodyne offer more dimension options than standard Pelican or Storm cases
  • Rotating the monitor or top stage components while keeping the rig on its stand can allow it to fit into cases without full disassembly
  • Separating components into multiple smaller cases with wheels can be more practical for frequent day-playing than one large heavy case
  • A semi-rigid bag designed for the sled shape requires only monitor and Bartech removal for transport
  • Heavy rigid cases protect equipment better during airport handling despite being burdensome to carry

Depends on

  • The discussion focuses on sleds with specific dimensions like 29 inches tall and 14.25 inches wide, which may not apply to all configurations
  • Custom cases from wood or fiberglass are heavier alternatives but may be necessary when standard cases don't fit
  • Some solutions mentioned, like turning the monitor sideways, work only for certain monitor types and mounting systems
  • Experiences described are from individual operators with different rig configurations and travel patterns

Parts

Top Stage, Docking Bracket

Same gear or parts

  1. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
  2. 2026Used Zephyr with original SD monitor shows 'No signal' with Sony FX6; HD-SDI compatibility and monitor upgrade.FacebookSteadicam operators group
  3. 2026Upgrading an older Steadicam® MK-V with 1.5-inch post to Volt configuration or switching to the new Steadicam® Elite (1.25-inch post, 14 kg).FacebookThe Steadicam Group
  4. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsDisputedSteadiHub
Read the original threadAsk about this threadThe answer cites the archive