What the thread found

• The Steadimate A-30 harness may transmit hip sway movement to a mounted Ronin gimbal during walking, causing visible wobble in the camera image.
• An Exovest is reported to reduce hip sway transmission to the gimbal compared to traditional-style vests because pelvic bone motion does not directly affect the socket block.
• Adjusting the Exovest to have a slightly more obtuse hip pivot angle can further reduce gimbal movement during operation.

Depends on

• The comparison is based on limited hands-on experience with the Steadimate A-30, with only a few days of field testing mentioned.
• The wobble issue was observed specifically when using a traditional Cinema Products vest, not tested with an Exovest.
• The setup difference between gimbal-based systems and traditional sled-based systems means previous operator experience with one type may not directly transfer to the other.

Gear in this thread

Zephyrcatalog, Master Seriescatalog

Same gear or parts

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group
3. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
4. 2026Adjusting play in a Steadicam® Master Series gimbal yoke and balancing it for smooth 180-degree pan without tipping.DisputedFacebookSteadicam operators group