What the thread found

• The Cinetronic CDL level mounts in the same position as the earlier PDL on compatible sleds.
• The level must be mounted with the logo facing upward and kept within 2 degrees of level for proper operation.
• The device includes inertia compensation similar to other modern levels.
• Users reported the level responds well with dampening set to 3 and gyro set to 1, providing responsiveness comparable to the PDL.
• The level display can be overlaid on a black background outside the image area and scaled smaller to match other monitor sizes.
• The level span can be configured to 2 degrees.

Depends on

• Early adopters needed time to become familiar with the controls and settings.
• Limited user testing had been completed at the time of the discussion.
• Mounting orientation is strictly required for proper function.

Gear in this thread

CineLivecatalog

Same gear or parts

1. 2025Organizing and transporting a Steadicam® kit in cases: storage, logistics, and rapid deployment.DisputedFacebookThe Steadicam Group
2. 2025ALEXA 35 powering down when 24 V sled cable is disconnected or sled battery is swapped; voltage priority and status indicators.DisputedFacebookThe Steadicam Group
3. 2025Gimbal upgrade path for GPI PRO CineLive: Volt 2 now versus Volt 3 or alternative horizon stabilizers (Wave, MK-V Level), and adapter compatibility.DisputedFacebookThe Steadicam Group
4. 2025Isolating vibration sources in a PRO CineLive rig running at speed: camera plate, battery mounts, gimbal belt tension, and arm cushioning.DisputedFacebookSteadicam operators group