What the thread found

• A Betz Wave can be mounted on a Tiffen Archer 2 with a smaller dovetail plate, similar to the configuration used on a Tiffen Clipper.
• With a light camera, the setup is viable; one operator reported successfully flying an ARRI Alexa LF in this configuration.
• The trade-off is that the sled becomes noticeably longer when using the Wave.
• Some operators have switched from the Wave to a Tiffen Volt on compact sleds, citing the length disadvantage.

Depends on

• Camera weight and lens configuration affect practicality.
• Personal preference and operational style determine whether the increased sled length is acceptable.

Gear in this thread

Voltcatalog, Wavecatalog

Parts

Dovetail Plate, Top Stage

Same gear or parts

1. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
2. 2026Upgrading an older Steadicam® MK-V with 1.5-inch post to Volt configuration or switching to the new Steadicam® Elite (1.25-inch post, 14 kg).FacebookThe Steadicam Group
3. 2026Choosing between Wave, Volt 2, and MK-V Level gimbals: performance in wind, rig weight, maintenance, and mode switching.DisputedFacebookSteadicam operators group
4. 2026Repairing shorted BNC video lines in an ARRI Artemis 1 sled: interim workarounds and permanent solutions.FacebookSteadicam operators group