What the thread found

• The D-21 features a composite SD output on the back provided via a CVBS BNC connector.
• Fiber optic cable systems such as the Rattler are suitable for remote operation of the D-21.
• The S.two flashmag system is an emerging alternative for camera signal transmission from this camera.
• Power and camera control cables are compatible with those used on the Arri 435 and LT models.
• A lightweight BNC jumper cable is needed when not using fiber or flashmag systems for video output.
• The low-mode bracket supplied with the D-21 is wider than that of the LT but remains relatively lightweight.
• SMPTE fiber jumper cables that include integrated power delivery are durable and flexible enough for handheld camera work.
• The composite SD output provides full 35mm-style headroom above the frameline when monitoring on NTSC devices.

Depends on

• The discussion does not specify technical details about flashmag or fiber system compatibility beyond naming them as options.
• Information about custom fiber adapters for the D-21 is mentioned but not confirmed as completed.
• The date of this discussion (2009) means some technologies discussed may be outdated.

Parts

Low Mode

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.DisputedFacebookThe Steadicam Group
3. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
4. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsDisputedSteadiHub