What the thread found

• The G-70 arm bracket can be repositioned by pulling out a pin and aligning the mating parts into one of two possible positions.
• The 'in' position configuration works better when using the mounting armature and socket block oriented for back-mounted vests.
• Repositioning the bracket is the same operation as switching between regular and goofy foot stance.
• The two-position bracket feature is specific to the G-70 arm, also referred to as the kickback link.

Depends on

• The exact disassembly procedure for the arm beyond the bracket repositioning was not detailed in the discussion.
• No comprehensive manual section covering full arm disassembly for cleaning was provided or confirmed to exist.

Gear in this thread

G-70catalog

Same gear or parts

1. 2023Performance and value assessment of Rever Steadicam stabilizer systemsGeneral Discussion
2. 2023Backup and spare equipment for Steadicam® operators: priority list and budget considerationsFacebookSteadicam operators group
3. 2023Hanging a Tiffen G50X arm on a docking mount pin without a harness; availability of longer arm posts.FacebookThe Steadicam Group
4. 2022G-70 arm: eliminating bridge bumper impacts between upper and lower sections after tuningFacebookSteadicam operators group