What the thread found

• The Zephyr Vest comes in regular and compact versions, with the compact being unsuitable for tall operators while the regular version may still provide poor fit at extreme heights.
• Custom vest makers take individual measurements during the ordering process to ensure proper fit for operators of varying heights.
• An alternative modification involves repositioning the center plate on the outside of the vest to allow adjusting the eye level by sliding the bridge plate down.
• Ordering a custom vest without a socket block can reduce costs significantly.
• Established custom vest manufacturers like GPI Pro and Walter Klassen offer made-to-measure options for tall operators.

Depends on

• The thread does not provide specific details on how well the modifications actually resolved the comfort issues.
• No information is given about the ease or complexity of modifying an LX vest.
• One commenter was uncertain whether the mentioned manufacturer could help with modifications.

Gear in this thread

Zephyrcatalog

Same gear or parts

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
4. 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group