SteadiHub
2009Cases/Carts/Stands and Transport forum

Transporting camera sleds during truck moves and between locations

17 years old. Gear and prices may have changed since.

What the thread found

  • A sled placed on a foam bed in the camera truck and secured with bungee cords is a reliable transport method that has worked without damage over several years of use.
  • A sled sock placed over the rig on a foam bed allows leaving attachments like monitoring equipment partially exposed without needing to fully retract them, which would otherwise be required for a hard case.
  • Hard cases are primarily used for shipping and moving from home to location, while foam beds serve well for transport during active work days.
  • On shorter moves when time is critical, securing the sled in a vehicle's back seat with sand bags placed on top of the post and center area provides practical protection.
  • Custom cargo configurations such as full-width drawers or bolted upright storage compartments in dedicated vans can keep rigs accessible and ready for immediate deployment.
  • Foam bed setups benefit from bungee cord restraints to prevent shifting if the vehicle makes sudden movements.
  • Leaving the sled visible on a foam bed without covering discourages others from placing objects on top of it.

Depends on

  • Storage methods vary based on whether a dedicated camera truck is available versus smaller vehicles like SUVs or personal cars.
  • Some approaches described are used informally without certainty about how gear is actually handled during transport (crew visibility is limited).
  • The discussion includes anecdotal preferences rather than systematic testing of protection methods.

Gear in this thread

MDR

Same gear or parts

  1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
  2. 2025Custom servo zoom controller for Tilta Nucleus system using Bebob Zoe housing and 7-pin LEMO connectorFacebookSteadicam operators group
  3. 2024Mounting Sony Venice 2 on ARRI Trinity with SAM-0 plate: build configuration and balancing strategies.FacebookArri Artemis Trinity
  4. 2023Mounting Preston MDR4 focus motor and Light Ranger iris control on an ALEXA 35 on the ARRI TrinityFacebookArri Artemis Trinity
Read the original threadAsk about this threadThe answer cites the archive