What the thread found

• The Amira uses the same 3-pin connector as the Alexa for Run/Stop control, so existing Alexa cables are compatible.
• Early production Amiras had problems with Preston follow focus systems triggering unintended on/off events, which was fixed through hardware replacement involving the port or board.
• The Amira has only one Run/Stop 3-pin port available.

Depends on

• The issue with Preston triggering affected early production units and was resolved through repairs, so current units may not have this problem.
• Information is specific to cameras with MDR2 recorders.
• The resolution method involved hardware changes but specific technical details of the fix are not provided.

Gear in this thread

MDR

Parts

Follow Focus

Same gear or parts

1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
2. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
3. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
4. 2025Custom servo zoom controller for Tilta Nucleus system using Bebob Zoe housing and 7-pin LEMO connectorFacebookSteadicam operators group