What the thread found

• The resistance spring in the arm socket can break during use, particularly after extended operation or heavy use over several years.
• A broken spring can be replaced by the manufacturer, and replacement springs are available for order.
• Installation of the replacement spring requires caution to avoid injury, as the spring is under tension and can cause finger injuries if not handled carefully.
• Using temporary solutions like rubber bands is possible if waiting for a replacement spring.
• Spring failures have been reported across multiple arm models in this product line.

Depends on

• The exact failure rate and frequency of spring breakage is not documented in the thread.
• Reports span different usage durations and intensity levels, making it unclear what typical lifespan to expect.
• The specific cause of spring failure is not definitively explained.

Gear in this thread

G-70catalog

Same gear or parts

1. 2023Performance and value assessment of Rever Steadicam stabilizer systemsGeneral Discussion
2. 2023Backup and spare equipment for Steadicam® operators: priority list and budget considerationsFacebookSteadicam operators group
3. 2023Hanging a Tiffen G50X arm on a docking mount pin without a harness; availability of longer arm posts.FacebookThe Steadicam Group
4. 2022Arm section lengths (pivot-center to pivot-center) in PRO, Tiffen, Xarm, and NB models: whether larger boom range derives from longer sections or wider opening angles.FacebookThe Steadicam Group