What the thread found

• A mounting bracket can be designed to attach to an MDR3 and accommodate V-mount shoes or 1/4 20 threaded brackets in multiple positions
• The bracket design allows the V-mount shoe to be oriented in four different rotational positions at each of five possible mounting locations, providing twenty total configuration options
• The bracket itself can be flipped to mount either with the connector on top or bottom of the camera
• Alternative 15mm mounting options can be integrated with a locating pin system that also allows four different rotational positions at each location
• V-mount shoes salvaged from discarded SWIT batteries can serve as functional mounting elements and fit snugly in the bracket holes

Depends on

• The prototype had not yet been tested at the time of the initial post
• Availability of V-mount shoes from SWIT batteries was limited to approximately five units, with alternative Element Technica shoes potentially required if production quantities increased
• Pricing information was not finalized and depended on consultation between the designer and the manufacturing partner
• The designer did not have both the bracket and MDR3 together on location to document the final assembled configuration

Gear in this thread

MDR

Parts

Follow Focus

Same gear or parts

1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
2. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
3. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
4. 2025Custom servo zoom controller for Tilta Nucleus system using Bebob Zoe housing and 7-pin LEMO connectorFacebookSteadicam operators group