What the thread found

• Trimpacs batteries can be mounted on the rear of a Pro sled without modification, though an adapter may be needed for optimal spacing.
• An Anton Bauer Data Tap adapter enables front battery position mounting of Trimpacs and Pro Pacs batteries.
• The monitor bracket in the top rear position will not accommodate Trimpacs batteries.
• Proformer batteries can be re-celled by specialist services as an alternative to purchasing new battery packs.
• Pro 2 sled bases modified in recent years have been designed to accept Trimpacs in multiple positions with adequate movement clearance.

Depends on

• The exact modification needed for rear mounting has not been clearly documented in this thread.
• The age and model variant of the user's Pro sled base affects compatibility, with bases over four years old potentially lacking the clearance modification.
• Information about Pro 2 base modifications is based on recollection rather than confirmed specifications.
• The monitor bracket incompatibility specifically applies to top rear positioning, while other positions may differ.

Parts

Monitor Bracket

Same gear or parts

1. 2026Finding a bright (1500–2000 nits) low-mode monitor with recording and SDI I/O to replace a defective Transvideo Starlite.DisputedFacebookSteadicam operators group
2. 2026Powering everything from the sled: voltage, current, and why the two get confusedOperator practice
3. 2026Choosing and troubleshooting the monitor on a stabilizer rigDisputedOperator practice
4. 2026Modernizing Steadicam® PRO sled: Gen-2 battery holder retrofit and universal monitor bracket on the tube collar.FacebookSteadicam operators group