What the thread found

• Walkie talkie transmission near video monitoring equipment can cause complete signal dropout on HD monitors when the transmit button is pressed or released
• Poor shielding on BNC cables, particularly very short cables with minimal mesh coverage connecting camera to breakout boxes, increases susceptibility to RF interference
• Using non-HD-rated BNC cables for video signal transmission can lead to signal loss and dropout issues
• The Red Epic camera outputs a relatively weak and unclean signal that depends on high-quality cables to maintain integrity
• Testing the setup by connecting the camera directly to the monitor with a bypass cable can help identify whether the problem originates in the sled, breakout box, or cable shielding
• Professionally rebuilt sled cables with proper shielding may be necessary to resolve interference issues in some cases
• HD-rated BNC cables should be clearly advertised as such by the manufacturer

Depends on

• One user reported no interference issues with similar equipment, suggesting the problem may be specific to certain cable or component combinations
• The issue only appeared problematic when the walkie talkie operator was very close to the monitoring setup
• The exact model of the breakout box used in the problem setup was not identified, making it unclear if it contributed to poor shielding

Gear in this thread

CineLivecatalog

Same gear or parts

1. 2025Compatibility of PRO camera plates between original D-Box and D-Box II top stagesCamera Stage/Donkey Box
2. 2025Organizing and transporting a Steadicam® kit in cases: storage, logistics, and rapid deployment.DisputedFacebookThe Steadicam Group
3. 2025ALEXA 35 powering down when 24 V sled cable is disconnected or sled battery is swapped; voltage priority and status indicators.DisputedFacebookThe Steadicam Group
4. 2025Gimbal upgrade path for GPI PRO CineLive: Volt 2 now versus Volt 3 or alternative horizon stabilizers (Wave, MK-V Level), and adapter compatibility.DisputedFacebookThe Steadicam Group