What the thread found

• Upgrading from 24 AWG to 16 AWG power wire in a sled top stage provides some benefit and carries no risk since it is a reversible modification.
• An EXG 0B Lemo connector is rated for only 6 amps maximum current.
• Replacing the power Lemo connector with a larger one would require modifications to the printed circuit board and drilling of the end piece enclosure, making it impractical.
• At 12 volt operation, thicker gauge wire can be used without requiring an upgraded connector.

Depends on

• The discussion is specific to an original Archer sled model.
• The user had not yet tested the actual system performance with the upgraded wire at the time of the discussion.
• The original power issues mentioned were based on reports from other forum users rather than first-hand experience.

Parts

Top Stage

Same gear or parts

1. 2026Play in the sled: where it comes from and what can be fixed on the dayOperator practice
2. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
3. 2026Tiffen Steadicam® Elite sled (2026): build quality, power distribution, and load capacity versus Steadicam® Axis.FacebookSteadicam operators group
4. 2026Betz Tools has changed hands to 2eyetec, and what that means for parts and serviceOperator practice