What the thread found

• The MK-V J Box has pre-tapped screw holes on each side that can be used for mounting accessories.
• A V3 focus mount is available from the manufacturer in V2/Evo size and uses the pre-tapped holes on the J Box.
• An H-shaped bracket from a follow focus manufacturer can be attached to the MDR2 unit, then connected to the focus mount before fitting the assembly to the J Box.
• An alternative bar mount adapter exists that spaces the H-bracket correctly for mounting to 15mm bars on certain top stages.

Depends on

• The information is specific to MK-V equipment with J Box configuration.
• No off-the-shelf solution was confirmed as readily available at the time of discussion.
• The exact manufacturer and part numbers for all components are not fully detailed.

Gear in this thread

MDR

Parts

Follow Focus

Same gear or parts

1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
2. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
3. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
4. 2025Custom servo zoom controller for Tilta Nucleus system using Bebob Zoe housing and 7-pin LEMO connectorFacebookSteadicam operators group