What the thread found

• The EPIC is significantly lighter than anamorphic cinema lenses, requiring the camera to be offset toward the back of the sled for proper balance.
• The center balance point when using anamorphic lenses is typically around one-third of the lens length from the front.
• Additional mounting plates and accessories are needed to properly support and stabilize the EPIC on a sled system.
• A Preston remote start/stop cable for the EPIC requires an additional RED breakout cable adapter since the Preston cable ends with a female BNC connector.
• Loading the camera with accessories and adding weight is necessary to achieve proper sled handling and arm feel, as the bare EPIC is too light for stable operation.
• Firmware updates to the EPIC can enable new features such as playback and 720p SDI output.
• The EPIC can be powered by onboard batteries without a separate power cable when used on a sled.
• Panavision-supplied EPIC packages typically include necessary components for anamorphic lens operation.

Depends on

• The specific anamorphic lens package was not confirmed at the time of the inquiry.
• Firmware updates may have different availability depending on region.
• Earlier firmware versions lacked playback and image flipping features on the onboard monitor.
• The adapter solution for Preston remote start/stop requires manual fabrication.

Gear in this thread

G-70catalog

Same gear or parts

1. 2023Performance and value assessment of Rever Steadicam stabilizer systemsGeneral Discussion
2. 2023Backup and spare equipment for Steadicam® operators: priority list and budget considerationsFacebookSteadicam operators group
3. 2023Hanging a Tiffen G50X arm on a docking mount pin without a harness; availability of longer arm posts.FacebookThe Steadicam Group
4. 2022G-70 arm: eliminating bridge bumper impacts between upper and lower sections after tuningFacebookSteadicam operators group