What the thread found

• Wireless video transmitters mounted on or near HD cameras can cause visible interference patterns in recorded footage that may not be visible on monitor displays during shooting.
• P2 memory cards are susceptible to RF interference, which manifests as a 45-degree diamond pattern that becomes visible only when footage is reviewed on larger displays.
• Moving transmitters away from the camera body and recording devices resolves RF interference issues.
• Transmitters mounted under camera weight plates or Preston focus motor risers rather than on top of the camera reduce interference.
• Using wireless transmitter channels in higher frequency ranges reduces interference with onboard microphone inputs compared to lower channels.
• Small on-set monitors may not display RF interference that appears in the final recorded footage on larger reference displays.

Depends on

• Reports involve specific camera models and transmitter brands from a particular time period.
• No systematic testing data provided to establish which configurations reliably prevent interference.
• Unclear whether interference was definitively caused by transmitter proximity or if other factors coincided with the change in positioning.
• One operator experienced the issue with a specific transmitter mounting while another operator using the same camera model and similar mounting did not.

Gear in this thread

Moduluscatalog, MDR

Same gear or parts

1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
2. 2025Custom servo zoom controller for Tilta Nucleus system using Bebob Zoe housing and 7-pin LEMO connectorFacebookSteadicam operators group
3. 2024Mounting Sony Venice 2 on ARRI Trinity with SAM-0 plate: build configuration and balancing strategies.FacebookArri Artemis Trinity
4. 2023Mounting Preston MDR4 focus motor and Light Ranger iris control on an ALEXA 35 on the ARRI TrinityFacebookArri Artemis Trinity