What the thread found

• The Elaine uses a two-pin hermaphrodite Lemo connector for power supply, matching the XL model.
• The Elaine is generally heavier than an SR3 camera and ranks among the heaviest 16mm cameras in current use.
• The eyepiece on the Elaine cannot be removed.
• The Elaine features a Lowmode bracket and includes a video tap, though users report the video tap quality is poor.
• Complete Elaine setups with older heavy lenses and full matte boxes can reach approximately 40 pounds in total weight.
• The camera's actual weight is substantially higher than what its 16mm format designation might suggest.

Depends on

• The camera's total weight depends heavily on lens selection and accessories used.
• The eyepiece design may limit certain rigging or monitoring options.
• Video tap functionality appears to have limitations or quality issues.
• The Elaine appears to often arrive on set with older, heavier lens packages rather than modern lightweight optics.

Parts

Low Mode

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
3. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsDisputedSteadiHub
4. 2026Low mode and flipping the image: what to check on the camera before the dayOperator practice