SteadiHub
2014Batteries/Power forum

Anton Bauer G-Series battery release timeline, specifications, and manufacturing details

12 years old. Gear and prices may have changed since.

What the thread found

  • The G-Series batteries were undergoing final agency and DOT testing before release.
  • Manufacturing of the new batteries was to be handled by Panasonic in Mexico, which allowed cost reduction by eliminating assembly in Connecticut.
  • Panasonic required additional internal safety features that increased battery weight and size slightly compared to original designs.
  • The G90 model was planned for December release while G150 and G190 models were targeted for end of Q1.
  • A Steadicam-specific variant of the traditional 90-capacity battery was being developed with a footprint potentially smaller than the existing HC model.
  • New Digital series Gold Mount batteries would charge on legacy chargers including TM4 and QUAD 2702 four-position chargers.
  • A new LP4 charger was planned as an updated four-position simultaneous fast charger with LCD display.
  • Current HC, HCX, and legacy product lines would remain available for at least three to four months during the transition period and until NAB.
  • Anton Bauer reduced pricing on current battery and charger models in advance of new product release.

Depends on

  • The exact specifications and final form factor of the G-Series batteries remain unclear from the thread.
  • Impact 130 batteries and new Anton Bauer batteries were not confirmed to be cross-compatible with each other's chargers.
  • The discussion reflects plans and intentions from early 2014, which may not have been fully realized.

Gear in this thread

CineLivecatalog

Same gear or parts

  1. 2025Compatibility of PRO camera plates between original D-Box and D-Box II top stagesCamera Stage/Donkey Box
  2. 2025Organizing and transporting a Steadicam® kit in cases: storage, logistics, and rapid deployment.DisputedFacebookThe Steadicam Group
  3. 2025ALEXA 35 powering down when 24 V sled cable is disconnected or sled battery is swapped; voltage priority and status indicators.DisputedFacebookThe Steadicam Group
  4. 2025Gimbal upgrade path for GPI PRO CineLive: Volt 2 now versus Volt 3 or alternative horizon stabilizers (Wave, MK-V Level), and adapter compatibility.DisputedFacebookThe Steadicam Group
Read the original threadAsk about this threadThe answer cites the archive