Tiffen M2 steadicam sled specifications and features

2019General Discussion forum

The M2 is a modular sled with stage, base, and posts that are fully interchangeable with M1 components both mechanically and electronically.
The M2 features integrated Volt electronics built into the topstage as an optional feature.
The M2 has three HDSDI ports, two Lemo power ports, a tally connector, and two P-taps on the stage.
The M2 includes a tilt head with plus or minus 10 degree range.
The M2 gimbal uses high precision bearings and includes an integrated Volt encoder ring as an optional feature.
Post diameter on the M2 is 1.58 inches, matching the U2, Masters, Clippers, and Shadow models.
The M2 posts are lighter than M1 posts and the monitor rod spacing is 60mm rather than 100mm.
The M2 is available with two post length options in a 2-section configuration, or optionally with M1's 2 or 3-section post systems.
The M2 gimbal accommodates different arm post diameters of 0.500, 0.625, or 0.740 inches using spacers.
The M2 base supports both V-mount and Gold Mount batteries with switchable 12/24 volt output and an optional third battery mount.
V-mount battery release protectors can be retrofitted to M1 setups as a non-destructive add-on.
The M2 is significantly lighter than the M1 overall, with final weight specifications still pending.
The M2 uses the same motors and power specifications as the M1 Volt system.

Final specifications for weight, minimum and maximum lengths, and pricing were not finalized at the time of this discussion in April 2019.
Post-NAB design tweaks were still in progress.
Battery release protectors mentioned were initially 3D-printed prototypes designed specifically for IDX V-mounts and may not fit other battery brands with different release button shapes.
Official marketing materials and detailed specifications were expected to be released at CineGear or later.