What the thread found

• The Archer has a specified weight limit of 23 pounds but can be pushed beyond this, with users reporting loads up to 16 kilograms without gimbal problems.
• The Clipper steadicam rig is designed to handle heavier loads than the Archer, with a top stage rated for 35 pounds or more.
• When consistently flying loads of 18 kilograms or heavier, choosing a rig specifically designed for that weight range is preferable to pushing a lighter rig beyond its specifications.
• Adding bottom weight is necessary to balance the rig when using heavier camera packages, as the post extension has limits.
• Overloading a rig beyond manufacturer specifications may result in insurance claim rejection if equipment damage occurs.
• The Clipper 324 model is switchable between 12-volt and 24-volt power and is designed to fly HD ENG cameras and lightweight 35mm configurations.
• The Clipper top stage is narrower than the Ultra model, which limits the footprint available for heavier camera rigs.
• When using a G-70 arm with the Clipper instead of the standard G-50, greater weight capacity can be achieved.

Depends on

• Discussion dates to 2008 and may not reflect current equipment specifications.
• Weight-carrying experience reported is anecdotal rather than systematically tested.
• The Clipper 2 mentioned as used equipment availability was location-specific at time of posting.
• Specific insurance claim rejection scenario is theoretical rather than documented case.

Gear in this thread

G-70catalog

Parts

Top Stage

Same gear or parts

1. 2026Choosing and troubleshooting the monitor on a stabilizer rigDisputedOperator practice
2. 2026Transvideo has ceased trading: what owners of their monitors need to knowOperator practice
3. 2026Used Zephyr with original SD monitor shows 'No signal' with Sony FX6; HD-SDI compatibility and monitor upgrade.FacebookSteadicam operators group
4. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsDisputedSteadiHub