What the thread found

• Anton Bauer power taps (P-taps) may not be active on all stabilizer rigs even if the physical connectors are present, requiring verification before depending on them for power delivery
• A slip-on lens gear adapter can be fitted over the rubber focus ring of certain camera lenses to enable remote focus pulling with follow focus systems
• Custom cables can be fabricated to convert from Anton Bauer connectors to other formats such as 3-pin LEMO to four-slot female connectors for powering accessories with low current draw
• Multiple connector types exist for 12V DC power delivery, including 4-pin XLR as professional standard and various push-on connectors with different inner and outer diameters

Depends on

• The discussion focuses on equipment used with specific camera models from that era
• Verification of whether power taps are wired is necessary on individual rigs
• Custom cable solutions may require professional fabrication and come at significant cost
• The slip-on focus gear solution mentioned was specific to one rental house inventory

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion