What the thread found

• The Sony F55 is relatively lightweight for Artemis gimbal operation but becomes heavy when equipped with accessories like RAW recorder, V-lock battery, focus-and-zoom control, and matte box.
• Adding weight to the camera through battery placement or a weight cage improves gimbal balance and panning smoothness.
• The Sony F55 does not natively output SD composite video and requires an external down-converter to produce composite output for SD monitors.
• Both AJA and Decimator down-converters can perform HD to SD composite conversion for the Sony F55.
• AJA mini-converters may output multiple composite BNC connectors while the gimbal rig input accepts only a single composite BNC connector, requiring an adapter cable solution.

Depends on

• SD composite output via the test BNC connector was stated as not yet implemented in firmware at the time of discussion.
• AJA converter compatibility issues were reported but not fully resolved in the thread.
• Recommendations for weight solutions such as specific cage manufacturers are mentioned without complete technical details.
• This discussion is from 2013 and may not reflect current firmware or accessory compatibility.

Gear in this thread

Artemiscatalog

Same gear or parts

1. 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.DisputedFacebookThe Steadicam Group
2. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group
3. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
4. 2026Voltage display discrepancies between camera and RCP on ARRI Artemis Trinity 2: 24 V rail showing 23.4 V at RCP versus 28 V at camera.DisputedFacebookArri Artemis Trinity