What the thread found

• The Flyer arm and MK-V Lite sled require adapter modifications to work together because their connector diameters do not match—the arm post needs to be fitted with bronze bushings to accommodate a standard 5/8" sled post hole.
• A socket block adapter can be used to mount the Flyer arm to standard vests like Klassen or ratchet-buckle designs instead of the original Flyer vest.
• The MK-V Lite sled supports both 12 and 24 volt operation and includes HDSDI capability down the post.
• This combination produces a lightweight flying system suitable for small cameras like HDV format without noticeable weight on the operator.
• The modified setup can operate untethered for extended periods when locked in a static shooting position.

Depends on

• The Lite sled cannot carry IMAX-sized cameras despite its voltage versatility.
• Some users chose to machine custom adapters rather than purchase factory solutions, indicating cost was a consideration at the time.
• The discussion does not confirm whether rod ends on different socket blocks align without additional modification.
• The thread dates to 2006 and reflects equipment and market conditions from that era.

Parts

Arm Post

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Rocket Arm (elastic band arm) versus traditional spring arms like the G70x: performance, weight, build, and design dispute.DisputedFacebookThe Steadicam Group
3. 2026Recommended upgrade priorities for a GPI Pro steadicam rigSteadi-Newbies
4. 2025Differences between M-1 and M-2 gimbal designsGeneral Discussion