What the thread found

• ARRI and Sony Venice 1/2 are officially listed as compatible with Trinity 2; other cameras require practical testing, ideally with rental houses holding multiple bodies.
• Cameras successfully mounted on Trinity include ALEXA Mini, Mini LF, XT/XT Plus, Amira, ARRI 235, ARRI 416, RED DSMC2 bodies, V-Raptor, Komodo, Sony Venice 1/2, Blackmagic G1/G2/12K, Z-Cam, Panasonic, and other box cameras, with counterweights adjusted per lens choice.
• RED cameras require a specialized bracket to attach the ARRI mounting plate to the camera body; this bracket, available from accessory makers, is also usable for other camera types.
• Sony Venice with Master Anamorphic or large anamorphotic lenses plus counterweight approaches the Trinity 2 arm capacity limit, as the T2 is heavier than Trinity 1.
• Trinity 2 ring diameter matches Trinity 1, but the clamp plate sits slightly higher; cameras that fit tightly in T1 may not fit in T2.

Depends on

• Compatibility depends on specific camera model, lens choice, and counterweight configuration.
• Trinity 2 has reduced arm capacity compared to Trinity 1.
• No official compatibility list exists beyond ARRI and Venice.

Gear in this thread

Trinity 1catalog, Trinity 2catalog

Same gear or parts

1. 2026Buying strategy for a 25,000 USD entry-level rig: used Artemis-1 with Flowcine X-Arm versus Rever-Evo Sled, and the case for learning on budget equipment firstDisputedFacebookThe Steadicam Group
2. 2026Trinity vs. 360-degree roll head: practical job prospects and system flexibility for operator investment decisions.DisputedFacebookSteadicam operators group
3. 2026Trinity 2 tilt and roll drift in standard operation, and MGT-2 remote control connection causing pan and roll instability via LBUS.SteadiHub
4. 2026Voltage display discrepancies between camera and RCP on ARRI Artemis Trinity 2: 24 V rail showing 23.4 V at RCP versus 28 V at camera.DisputedFacebookArri Artemis Trinity