What the thread found

• The JVC GY-HD200U has gears on the focus ring that are compatible with follow focus motor systems.
• A 0.6M gear is typically used for focus on this camera model.
• The camera has a composite output connector.
• The 15mm rod bracket adapter from Cavision model R15PU can be used for mounting.
• The camera plate may have slight movement at the rear end and should be checked during setup.

Depends on

• Gear size may vary depending on the specific lens type attached to the camera.
• One contributor noted the camera plate can wiggle slightly and recommended using a wedge for stability.
• The discussion does not confirm whether all follow focus motor gear sets are universally compatible.

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion