What the thread found

• The M-One motor is engineered to work optimally with Bartech follow focus systems.
• The M-One motor delivers sufficient torque to rotate tight lenses and has a narrow physical profile.
• A custom mounting bracket comes with the M-One motor to facilitate flexible positioning on a camera rig.
• After six months of regular use, the M-One motor demonstrated reliable performance as a primary follow focus tool.
• When upgrading from older BFD follow focus units to the M-One motor, the BFD system may require readjustment to handle the increased power output.
• Heden M26P motors have shown reliable performance over extended periods without problems.

Depends on

• The availability of Heden M28VP units was uncertain at the time of the discussion.
• The readjustment requirement for BFD systems when used with the M-One motor applies specifically to those older units and their serial numbers.
• Experience with the M-One motor reported here is based on usage with Bartech systems, not necessarily with other follow focus equipment.

Gear in this thread

BFD

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025History of wireless focus and lens control systems for Steadicam®: from cable-based Cinema Products and Seitz to Preston digital, and European solutions by Chrosziel, cmotion, and ARRI.FacebookSteadicam operators group
4. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group