What the thread found

• The Zephyr stabilizer has a maximum payload capacity of 23 pounds (10.4 kg) according to manufacturer specifications
• The stated payload weight refers to the net camera weight being carried, not including the sled itself

Depends on

• The specification range provided (9 to 23 lbs) suggests different camera weights are supported, but the exact distinction between minimum and maximum operating conditions is unclear
• One user suggested empirical testing to verify limits rather than relying solely on specifications

Gear in this thread

Zephyrcatalog

Same gear or parts

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
4. 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group