What the thread found

• When operating a Titan arm with only two canisters, they should be placed diagonally opposite to each other rather than both aligned vertically
• A recommended configuration places the blue canister in the upper arm section at the top and the black canister at the bottom, then reverses this in the lower arm section with black at top and blue at bottom
• This diagonal opposing arrangement applies whether using two canisters of the same type or mixing different spring types

Depends on

• The optimal configuration may vary depending on specific setup requirements
• Guidance from multiple sources suggests there is a standard practice, but individual arm configurations might differ

Parts

Arm Post

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Recommended upgrade priorities for a GPI Pro steadicam rigSteadi-Newbies
3. 2026Rocket Arm (elastic band arm) versus traditional spring arms like the G70x: performance, weight, build, and design dispute.DisputedFacebookThe Steadicam Group
4. 2025Differences between M-1 and M-2 gimbal designsGeneral Discussion