What the thread found

• The BFD wireless follow focus system operates in the 900-927 MHz license-free band in the US
• A 900 MHz video transmitter placed near a BFD receiver can cause the receiver to overload, resulting in loss of reception
• Careful positioning and channel selection may allow a 900 MHz video system and BFD to coexist, but this approach is unreliable
• A 2.4 GHz or 2.5 GHz video transmission system is recommended when using a BFD to avoid frequency interference

Depends on

• The interference issue and recommended frequencies apply to US license-free band regulations
• Success with simultaneous 900 MHz operation depends on specific equipment placement and channel choices, making it unpredictable

Gear in this thread

BFD

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025History of wireless focus and lens control systems for Steadicam®: from cable-based Cinema Products and Seitz to Preston digital, and European solutions by Chrosziel, cmotion, and ARRI.FacebookSteadicam operators group
4. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group