What the thread found

• A custom LED battery meter can be added to a steadicam bottom sled that displays voltage status for each battery using color-coded indicators
• The LED meter uses four LEDs per battery showing green for 14-13 volts, yellow for 12 volts, and red for 11 volts
• The LED placement mirrors the physical battery positions when viewed from the side for intuitive interpretation
• The modification works optimally with the three-battery power distribution configuration but remains functional with other power distribution blocks
• Comparable LED battery display systems exist on other steadicam models such as those using Cine HD sleds

Depends on

• This was a custom modification with pricing around 300 dollars but may vary based on individual circumstances
• The LED configuration is optimized for a specific three-battery power distribution setup
• Availability and turnaround time depend on the service provider's workflow

Gear in this thread

Artemiscatalog

Same gear or parts

1. 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.DisputedFacebookThe Steadicam Group
2. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group
3. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
4. 2026Voltage display discrepancies between camera and RCP on ARRI Artemis Trinity 2: 24 V rail showing 23.4 V at RCP versus 28 V at camera.DisputedFacebookArri Artemis Trinity