What the thread found

• A custom bracket can be designed to attach a 19mm lens support directly to an XCS plate dovetail, eliminating the need for separate bridge and base plates.
• The bracket features adjustable 19mm aluminum bars that can be repositioned vertically and horizontally to accommodate different lens support placements relative to the camera.
• The 15mm rods that mount into the plate are approximately 75mm in length and can extend outward by roughly 1.5 inches for variable reach.
• When socket screws are tightened securely, the bracket remains rigid enough for motorized lens support applications, especially when braced by an actual lens support bracket.
• The bracket can be configured with multiple bar lengths by using interchangeable sets that take seconds to swap, allowing adaptation to different lens sizes and support requirements.
• This type of bracket proves useful for supporting anamorphic lenses and can be incorporated into larger camera rigs including matte boxes and focus systems.
• A kit configuration with different bar lengths and a spacing plate can keep the connection flush to the front of the dovetail.

Depends on

• Design is specific to XCS plates and their dovetail mounting system.
• Aluminum bars offer less strength than steel alternatives, though the bracket is intended to be partially supported by an actual lens support bracket during use.
• Production manufacturing proved cost-prohibitive when quoted, limiting commercial availability.
• Effectiveness depends on the lens support bracket being used simultaneously to provide lateral bracing and eliminate bar deflection.

Parts

Base Plate

Same gear or parts

1. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
2. 2026Operating a Steadicam® Zephyr without Volt: drop time, horizon control, and the effect of upper-rig weight distribution on balance.DisputedFacebookSteadicam operators group
3. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
4. 2026Camera adapter plates and stabilizer mounting systems to keep in a steadicam operator kitGeneral Discussion