What the thread found

• The original channel buttons on Modulus units have a mushroom-shaped plastic post that breaks easily and cannot be replaced as individual parts because the design is no longer manufactured.
• Attempting to solder new switches directly to the board can damage the board severely, resulting in expensive replacement costs that exceed the original repair estimate.
• Cramped Attic offers a module replacement solution for approximately $175 per button that uses improved potentiometers designed to resist being knocked off, with the tradeoff that the witness mark position rotates 90 degrees compared to the original design.
• Cramped Attic also performs additional adjustments to address other issues during the repair process.

Depends on

• The pricing and availability information is from 2007 and may no longer be current.
• Only one repair shop name and contact information was verified in the discussion; other potential repair options were mentioned but not confirmed.

Gear in this thread

Moduluscatalog

Same gear or parts

1. 2022Power connector pinout for Master Greenscreen CRT monitor with 6-pin Hirose connectorMonitors
2. 2017Wireless teleprompter setups for steadicam operationGeneral Discussion
3. 2016Performance and reliability characteristics of Tiltamax wireless video transmitters compared to competing brandsDisputedVideo Assist and Video Accessories
4. 2014Teradek Bolt transmitter running hot during operationVideo Assist and Video Accessories