SteadiHub
2007Batteries/Power forum

Battery power requirements for Arri 235 camera with wireless microphone transmission and accessories

19 years old. Gear and prices may have changed since.

What the thread found

  • Four Power Cubes and three Endura 80 batteries can reliably power an Arri 235 camera running at 24-60 fps along with a wireless microphone transmitter and a Bartech follow focus unit.
  • Two Dionic 90 batteries powered twelve 400-foot magazine loads per day on an Arri 235 camera, including sessions at up to 48 fps, demonstrating sufficient capacity for typical daily shooting.
  • Battery power requirements for an Arri 235 are comparable to those for a Sony F-900, so similar battery configurations should prove adequate.

Depends on

  • The advice was based on specific shooting patterns and magazine counts from individual experiences, which may differ from other production scenarios.
  • The experience mentioned used Dionic 90 batteries rather than the Dionic 160 batteries also available to the original questioner.
  • No data provided for extended high frame rate shooting beyond the 48 fps reference point.

Parts

Follow Focus

Same gear or parts

  1. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
  2. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
  3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
  4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion
Read the original threadAsk about this threadThe answer cites the archive