SteadiHub
2012Steadi-Newbies forum

Compatibility between stabilizer rig components including arms, vests, and sleds

14 years old. Gear and prices may have changed since.

What the thread found

  • Major stabilizer arm models like Pro Titan, Atlas, G-series, Master, 3A, EFP, Luna, Silverspring, and Sachtler are generally compatible with corresponding vest systems.
  • The connection between arm and vest is standardized through socket blocks, though smaller rigs use different socket block sizes than full-size systems.
  • Full-size socket blocks should not be mounted on smaller vests as they exceed the weight design limits of those platforms.
  • Arms and sleds connect through pin or dowel interfaces that can be modified by machining different diameters to achieve compatibility.
  • Tiffen and CP arms have some incompatibility issues with certain vests, though solutions exist.
  • Building a complete rig from individual used components is feasible for those willing to invest time in research and potential modifications.
  • Local operators and hands-on workshops provide valuable practical knowledge about component compatibility that archives cannot fully document.

Depends on

  • The discussion acknowledges this is not a comprehensive compatibility list.
  • Some equipment-specific incompatibilities exist but are noted as having workarounds rather than being absolute barriers.
  • Exact compatibility rules for Glidecam and ActionCam systems were uncertain to participants.
  • No detailed information was provided about which specific arm-sled combinations create problems.
  • The advice emphasizes that direct experience through workshops and consultation with local operators is needed beyond what forum discussion can convey.

Gear in this thread

Zephyrcatalog, G-70catalog

Same gear or parts

  1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
  2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
  3. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
  4. 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group
Read the original threadAsk about this threadThe answer cites the archive