What the thread found

• Gold Mount is the standard connection type used by Anton Bauer and compatible third-party battery manufacturers for Steadicam equipment.
• Multiple aftermarket battery brands work with Gold Mount systems, including Globalmediapro, Hytron, and Batteries 4 Broadcast models.
• Off-brand Gold Mount batteries are significantly cheaper than Anton Bauer brand batteries and work adequately for powering monitors and follow focus systems.
• Each battery brand typically requires its own dedicated charger, so mixing brands may require multiple charging solutions.
• Anton Bauer chargers include rejuvenation cycles that periodically discharge and recharge batteries to prevent cell memory degradation.
• Anton Bauer batteries and chargers provide better availability through rental houses and television stations if replacements or repairs are needed while traveling.

Depends on

• Aftermarket batteries may not be acceptable on professional productions that require name-brand equipment.
• Compatibility between third-party batteries and Anton Bauer chargers was reported as problematic.
• The Hytron 50 model mentioned is noted as unsuitable for powering power-hungry cameras.
• Discussion assumes basic power requirements for monitor operation rather than heavy camera loads.

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion