SteadiHub
2014Steadi-Newbies forum

Wireless transmitter use in hospital environments and potential interference risks

12 years old. Gear and prices may have changed since.

What the thread found

  • Wireless follow focus and video transmission equipment has been used in hospital hallways without reported incidents, though the user did not inform hospital staff and monitored for issues.
  • Operating the equipment outside of active surgery and procedure rooms reduces risk exposure.
  • A wireless transmission unit operating in the 5.1 to 5.8 GHz frequency band was assessed by hospital technical staff as unlikely to interfere with typical hospital equipment operating ranges.
  • Turning off wireless transmitters when not actively in use and avoiding use during peak operational hours minimizes potential interference exposure.
  • Hospital administrators may accept cable-based alternatives if wireless transmission causes problems during shooting.

Depends on

  • The experience involved standard definition rather than HD transmitters in one case and operation during off-peak hours when the facility was largely empty.
  • No actual interference incidents were documented, making it impossible to confirm whether equipment would have caused problems if the facility had been fully operational.
  • The frequency assessment was informal advice rather than an official hospital protocol or engineering analysis.
  • Different hospitals may have different equipment configurations and electromagnetic environments that affect compatibility.
  • No direct testing or verification of interference was performed.

Parts

Follow Focus

Same gear or parts

  1. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
  2. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
  3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
  4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion
Read the original threadAsk about this threadThe answer cites the archive