What the thread found

• The 6-pin Hirose monitor output on an EFP sled carries both video signal and 12V power supply
• Pin 1 is video ground
• Pin 2 is video signal input
• Pin 5 is +12V DC
• Pin 6 is power ground

Depends on

• This applies specifically to EFP sleds with 6-pin Hirose connectors
• Initial conflicting information was provided but later corrected
• Documentation was from 2004

Gear in this thread

Moduluscatalog

Same gear or parts

1. 2022Power connector pinout for Master Greenscreen CRT monitor with 6-pin Hirose connectorMonitors
2. 2017Wireless teleprompter setups for steadicam operationGeneral Discussion
3. 2016Performance and reliability characteristics of Tiltamax wireless video transmitters compared to competing brandsDisputedVideo Assist and Video Accessories
4. 2014Teradek Bolt transmitter running hot during operationVideo Assist and Video Accessories