What the thread found

• A dovetail plate can be mounted to an Alexa camera using minimal cost by utilizing the camera's existing clip and a threaded washer or nut as a spacer.
• The basic mounting technique works with multiple types of dovetail plates and can be adapted for different camera models.
• The method can function with a standard camera screw head placed in the camera's bottom clip combined with a washer and nut underneath the dovetail plate.
• This mounting approach is applicable to broadcast cameras as an alternative to dedicated quick-release plates.
• Some operators may achieve this modification at no additional cost while others need only a few dollars worth of fasteners.

Depends on

• The specific Tiffen washer mentioned was designed for this purpose but is optional; standard hardware can substitute for it.
• Tightening the connection can be more difficult when using improvised fasteners compared to purpose-built solutions.
• The technique was demonstrated with at least three different dovetail plate designs, but full compatibility across all plate types is not explicitly confirmed.
• The setup may add some weight compared to optimized mounting solutions.

Parts

Dovetail Plate

Same gear or parts

1. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group
2. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
3. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
4. 2026Managing weight constraints when flying large-format film cameras with heavy anamorphic lenses on a Steadicam rigGeneral Discussion