What the thread found

• When a Heden M26VE digital motor is connected to a Bartech remote control unit, the system may fail to initialize or calibrate if the power supply cannot deliver sufficient current.
• Excessive torque settings on the control device can cause the motor to draw more power than a battery can supply, resulting in system failure.
• A 68Wh battery may reach capacity limits quickly if powering multiple devices simultaneously such as camera, monitor, and wireless transmitters in addition to the motor.
• Testing with an alternative power source can help determine whether the issue originates from the battery or the wireless follow focus kit.

Depends on

• The exact battery model and condition were not confirmed.
• The specific torque settings and their relationship to power consumption were not quantified.
• No resolution to the original problem was documented in the thread.
• The advice assumes a BDR control device without complete confirmation of the user's equipment configuration.

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion