What the thread found

• Vibrations in Pilot footage can result from loose connections at multiple points in the rig, including the vest-to-arm interface, gimbal-to-armpost connection, monitor mounting, battery attachment, weights, or camera/rod fastening.
• Incorrect spring tension settings may contribute to vibration problems.
• Extended armpost position is associated with increased vibration issues.
• Operator leg movement and technique can introduce vibrations into the shot.
• Flying with a lighter camera load than the rig was balanced for may cause vibrations.
• Achieving proper dynamic balance can help reduce vibration problems.

Depends on

• The exact root cause was not definitively identified in this discussion.
• No specific camera model or weight configuration was confirmed as causing the issue.
• The relationship between post extension and vibrations was mentioned anecdotally but not thoroughly tested.
• Flying light is suggested as a possible cause but not confirmed as the actual problem in this case.

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion