What the thread found

• The microforce V+F follow focus system works exclusively with analog motors, not digital motors.
• The microforce V+F can communicate with a control unit, though some original versions may be limited to film-only operation and cannot interface with video lenses or the control unit.
• Horizontal zoom motors like the Heden M26T can be used as an alternative option with the V+F system.
• Direct cable connections to lenses with integrated zoom motors (such as Fujinon and Canon 2/3 inch models) are possible alternatives.
• Heden analog motors come in two types: position-sensing models marked with P and speed/direction-sensing models marked with T.
• The microforce V+F requires speed/direction-sensing motors and reads information from the motor's tachometer to determine rotation speed and direction.
• Position-sensing Heden motors such as the M26P are incompatible with the microforce V+F system.

Depends on

• The information originates from a 2014 forum discussion and may not reflect current product compatibility.
• Some original V+F units may have limitations with video lenses and control unit communication.
• This compatibility information appears specific to the Heden motor models discussed and may not apply to all analog motor options.

Parts

Follow Focus

Same gear or parts

1. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
2. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion