What the thread found

• Low-power transmitters around 10 milliwatts tend to produce signal dropouts and perform poorly compared to higher-powered units like those rated at 750 milliwatts.
• A 30 milliwatt transmitter with a booster reaching 240 milliwatt output can perform reliably and maintain signal over good distances on production shoots.
• Transmitters rated at 1000 milliwatts or 2000 milliwatts are available from various suppliers and have been used successfully.
• Price alone does not determine transmitter quality; both very cheap and expensive units can perform poorly.
• Compact wireless transmitter systems combining transmitter, diversity receiver, and monitor capability are available in the market.

Depends on

• The comparison between the Markertek 10 milliwatt unit and the Modulus is based on speculation rather than direct testing.
• Discussion references specific German and Australian suppliers and models that may have limited availability or regional distribution.
• Recommendations rely on anecdotal evidence from individual production experiences rather than systematic testing.
• No technical specifications or performance measurements are provided for most units mentioned.

Gear in this thread

Moduluscatalog

Same gear or parts

1. 2022Power connector pinout for Master Greenscreen CRT monitor with 6-pin Hirose connectorMonitors
2. 2017Wireless teleprompter setups for steadicam operationGeneral Discussion
3. 2016Performance and reliability characteristics of Tiltamax wireless video transmitters compared to competing brandsDisputedVideo Assist and Video Accessories
4. 2014Performance comparison of wireless video transmitter systems for on-location workDisputedVideo Assist and Video Accessories