What the thread found

• The Cmotion Camin receiver can be mounted to a PRO Cinelive sled using several different mounting solutions depending on the Camin model and mounting preference.
• The cfast vlock provides a quick release mounting option for the Camin receiver.
• A rod connector is available for mounting the Camin to 19mm or 15mm rods.
• The cfast artemis is a smaller mounting tool that may be compatible with the PRO Cinelive, though compatibility should be verified.

Depends on

• The specific mounting solution depends on which Camin model is being used (2M, 4M, or 3M).
• Compatibility of the cfast artemis with PRO Cinelive sleds was not confirmed in the discussion.
• This thread does not address mounting compatibility with existing Preston or BFD equipment on the sled.

Gear in this thread

Artemiscatalog, CineLivecatalog

Same gear or parts

1. 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.DisputedFacebookThe Steadicam Group
2. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group
3. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
4. 2026Voltage display discrepancies between camera and RCP on ARRI Artemis Trinity 2: 24 V rail showing 23.4 V at RCP versus 28 V at camera.DisputedFacebookArri Artemis Trinity